Front Suspension for 2004 Chrysler Pacifica
Screw
Starter To Transmission. Engine Mount To Cylinder Block. Starter To Engine Block. Bearing to Knuckle. Y-Pipe To Exhaust Manifold. M10x1.50x65.00. Starter motor to engine.
Nut
Steering Gear Tie Rod End. Knuckle to LCA. Knuckle to Lower Control Arm.
Nut
M12x1.25. Knuckle to LCA. Steering gear to tie rod end. Tie Rod Ends to Tie Rod. Strut to Strut Rod. Knuckle to Lower Control Arm.
Bolt
LCA to Axle. Lower Control Arm Mounting Front. Lwr control arm frt to cradle. LCA to Body.
M12x1.75. Link to Sway Bar. Use With Link Kit #68399868AD. Link to Strut. Front Engine Mount To Cradle.
Hex Head Screw And Washer
Engine Mount To Engine Mount To Cradle. Sway Bar Bracket to Axle. Sway Bar Retainer to Frame Mounting. Engine Mount Bracket to Cradle. Sway Bar to Cradle. Sway Bar Retainer to Axle. M10x1.50x35.00.
Hex Head Screw And Washer, Heat Shield Attaching
Heat Sheild To Engine Mount. M6x1.00x11.00. Wiring Harness to Bracket. Heat Shield to Mount. Engine Mount Heat Shield. Engine Mount Bracket To Cylinder Block. Ground Strap to Urea Tank Crossmember.
Hex Head Screw And Washer, Heat Shield Attaching
Heat Sheild To Engine Mount. M6x1.00x11.00. Wiring Harness to Bracket. Heat Shield to Mount. Engine Mount Heat Shield. Engine Mount Bracket To Cylinder Block. Ground Strap to Urea Tank Crossmember.
Camber Adjustment Bolt Package
Strut to Knuckle. 2 Per Vehicle. 2 Bolts Included in Each Kit. Only 2 Kits Needed. This Is A Repair Package For One Side, See Quanity. Use With Service Strut.