Timing Belt and Cover for 2004 Chrysler Pacifica
M10x1.50. As Required. Upper Intermediate Shaft to Steering Column. Outer Timing Cover To Cylinder Block. Attach Elbow to Cyl Head. Bracket Attach. Timing Belt Cover Outer to Inner. Support Bracket.
Hex Head Screw And Washer
HEX HEAD
Timing Belt Gear
Crankshaft Gear. Crankshaft Timing Belt. Front Crankshaft.
Timing Belt Cover, Inner
Throttle Body mounting. Throttle Body to Intake. Rear. [m6x1.00x45.00]. .19-16x1.00. [M6x1.0x45.0]. Inner Timing Belt Cover To Cylinder Block. Water Pump to Timing Belt Cover.
Timing Belt Cover, Inner
Includes pump, pulley, and gasket. Contains pump, pulley, and gasket. With Pulley.
Timing Belt Cover, Inner
M6x25x12.5. Water pump to timing belt cover. Trans Throttle Control Lever. Splash guard to left front axle.
Plain Washer, Camshaft Sprocket Attaching
Id=m13 od=31.00 thk=5.71. Camshaft Sprocket To Cylinder Head. Right Or Left Camshaft Sprockets. M13x31.00x5.71.
Hex Head Screw, Camshaft Sprocket Attaching
M12x1.5x258. Left. [m12x1.50x258.00].
Hex Head Screw, Camshaft Sprocket Attaching
M12x1.5x215. Right. [m12x1.50x215.00].
Belt Tensioner
Includes Pulley. Includes Mouting Bolts. Arm And Pulley Assembly.
Belt Tensioner
Includes Pulley. With Arm, Pivot Bolt, and Snubber. Includes Mouting Bolts. Arm And Pulley Assembly.
Timing Belt Cover, Outer
M6x1x35. Timing Belt Cover To Block Right Rear. M6x1.00x35.00. Chain Tensioner To Carrier Gear. Inner Cover To Cylinder Head.
Hex Head Bolt And Coned Washer, Tensioner
M8x35x17. Chain Guide To Cylinder Block. Attach. M8x1.25x35.00.
With Arm, Pivot Bolt, and Snubber. Contains: Crank, Rods, Pistons, Rings, Pick Up Tube, Oil Pan.
Hex Head Screw And Washer
Camshaft Thurst Plate To Cylinder Head. Front Inner Cover To Cylinder Head. Camshaft Thrust Plate. M8x1.25x25.00. [naa,nae,nas]. Inner Cover To Right Cylinder Head. Timing Belt Cover Inner to Cylinder Head. Outer to Inner. Bracket To Canister.
Hex Head Screw And Washer
M10x1.5x85. Chain Cover Attach. Timing Cover To Engine Block. Cover to Head. Cover To Cylinder Block.
Mounting Timing Belt Cover To Cylinder Head. A/C Bracket to Engine Block. Timing Belt Cover Inner to Head Left. M10x1.50x35.00. Starter to Transmission. Front Inner Cover To Cylinder Head. M10x1.5x35. [M10x1.5x35.0].